Mustang V8-4.6L DOHC VIN R (2003)
17. Position the differential assembly, including the differential bearing cups and differential bearing shims, in the differential housing. Install the
bearing caps and bolts.
18. Position the special tool.
1
Rotate the differential case to verify that the differential bearings have seated correctly.
2
Position the special tool.
19. Measure the differential case runout.
^
If the runout does not exceed the specification, use the new differential bearings for assembly.
^
If the runout exceeds the specification, install a new differential case.
20. Remove the differential assembly from the differential housing.
Installation
All axles