Mustang V8-4.6L DOHC VIN R (2003)
10. Install the special tool.
1
Position the special tool.
2
Install the bearing caps.
3
Install the four bolts.
11. NOTE: Use only flat, clean drive pinion bearing adjustment shims.
NOTE: Selection of too thick a shim results in a deep tooth contact at final assembly. Do not attempt to force the shim between the special tools.
A slight drag indicates correct shim selection.
Use a drive pinion bearing adjustment shim as a gauge for shim selection.
^
After determining the correct shim thickness, remove the special tools.
12. Position the correct thickness drive pinion bearing adjustment shim and the differential pinion bearing on the drive pinion gear. Using a suitable
press and the special tools, press the differential pinion bearing until it seats firmly against the drive pinion gear.
