Mustang V8-4.6L DOHC VIN R (2003)
2. Force up the metal flange of the rear axle drive pinion seal. Install gripping pliers and strike with a hammer to remove the seal.
Installation
1. Lubricate the new rear axle drive pinion seal.
^
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. CAUTION: Installation without the proper tool can result in early seal failure.
CAUTION: If the rear axle drive pinion seal becomes misaligned during installation, remove it and install a new one.
Using the special tool, install the rear axle drive pinion seal.
3. Install the pinion flange.
