Mustang V8-4.6L DOHC VIN R (2003)
Drive/Propeller Shaft: Service and Repair
Disassembly and Assembly
Driveshaft Slip Yoke
Driveshaft Slip Yoke
Special Tools
Special Tool(s)
Disassembly
1. Remove the driveshaft.
2. CAUTION: Under no circumstances is the driveshaft assembly to be clamped in the jaws of a vise or similar holding fixture. Denting or
localizing fracture can result, causing driveshaft failure during vehicle operation.
Place the driveshaft on a suitable workbench. Be careful not to damage the tube.
3. NOTE: If components are not marked and therefore installed incorrectly, driveline imbalance can occur.
Index-mark the driveshaft components.
4. Clamp the special tool in a vise.
