Mustang V8-4.6L DOHC VIN R (2003)
Back Window Glass: Service and Repair
SPECIAL TOOL(S)
REMOVAL
Convertible
1. For removal of the back window glass, refer to Convertible Top.
Coupe
WARNING: TO PREVENT GLASS SPLINTERS FROM ENTERING EYES OR CUTTING HANDS, WEAR SAFETY GLASSES AND
HEAVY GLOVES WHEN CUTTING GLASS FROM THE VEHICLE.
2. Remove the roof side trim moulding.
3. Lower the rear portion of the headliner.
4. Remove the outer lip of the moulding using a utility knife.
5. Using a soft brush or vacuum, remove any dirt or foreign material from the pinch weld.
6. Using the special tool, starting at the top center of the back window glass, cut the urethane adhesive from the glass and work down the sides.
CAUTION: Care must be taken to prevent scratching the pinch weld.
NOTE: Lubricate the existing urethane adhesive with water to aid the special tool while cutting.
