Mustang V8-4.6L SC VIN Y (2004)
Front Bumper Reinforcement: Service and Repair
FRONT BUMPER
Special Tool(s)
Special Tool(s)
Removal and Installation
All vehicles except Cobra
1. Remove the front bumper cover.
Cobra
2. Remove the charge air cooler.
All vehicles
3. Remove the two rivets and the front bumper isolator.
Cobra
4. NOTE: The charge air cooler bracket is removed for clarity.
Remove the four bolts and the two intercooler radiator brackets.
All vehicles
5. Remove the bolts and the front bumper.
6. To install, reverse the removal procedure.
