Mustang V8-4.6L SC VIN Y (2004)
Brake Pad: Service and Repair
Front
Brake Pads - Cobra
Removal
1. Remove brake fluid in the master cylinder reservoir until the reservoir is half full.
2. Raise and support the vehicle.
3. Remove the tire and wheel assembly.
4. CAUTION: Install new pads if worn to or past the specified thickness above the metal backing plate or rivets. Install new pads in complete axle
sets.
Inspect the pads for wear and contamination.
5. Remove the caliper locating pin E-clip.
6. Remove the caliper locating pin.