Mustang V8-4.6L SC VIN Y (2004)
1. CAUTION: Do not hone the caliper bores. Caliper pistons are not available for honed caliper bores.
Clean and inspect the caliper pistons and the disc brake caliper.
^
Remove dirt and debris.
^
Examine the caliper pistons for surface irregularities, scoring or wear. Damaged caliper pistons should be installed new.
^
Clean the caliper bores with Metal Brake Parts Cleaner F3AZ-19579-SA or equivalent meeting Ford specification.
^
If the caliper bores are corroded or excessively scored, install a new disc brake caliper.
^
Lubricate the caliper pistons and piston seals before assembly.
2. CAUTION: Never reuse piston seals and dust boots.
NOTE: Never reuse brake fluid that has been drained from the hydraulic system or has been allowed to stand in an open container for an
extended period of time.
Lubricate the caliper piston, piston seal and caliper bores with clean High Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent DOT 3
fluid meeting Ford specification ESA-M6C25-A.
