Mustang V8-4.6L SC VIN Y (2004)
Cruise Control Servo Cable: Service and Repair
ACTUATOR CABLE - SPEED CONTROL
REMOVAL
1. Remove the speed control actuator cable end from the throttle body.
1
Lift the speed control cable from the throttle nailhead.
2
Release the speed control cable from the throttle bracket.
2. Remove the speed control cable from the retaining clips.
3. Remove the LH front wheel and tire assembly.
4. Position aside the LH front splash shield.
-
Remove the pin-type retainers.
-
Remove the screws.
