Mustang V8-4.6L SC VIN Y (2004)
Air Door Actuator / Motor: Service and Repair
Vacuum Control Motor - Air Inlet Duct Door
VACUUM CONTROL MOTOR - AIR INLET DUCT DOOR
REMOVAL
1. Remove the instrument panel. For additional information, refer to: Dashboard/Instrument Panel. See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair
2. Disconnect the vacuum hose.
3. Disconnect the control arm.
4. Remove the vacuum control motor.
-
Remove the screws.
INSTALLATION
1. To install, reverse the removal procedure.
