Mustang V8-4.6L SC VIN Y (2004)
11. Pull the seal from the A/C compressor.
INSTALLATION
1. CAUTION: To prevent refrigerant system contamination, do not allow dirt or other foreign materials to enter the A/C compressor.
Clean the A/C compressor nose area.
2. Place the shaft seal on the special tool. Lubricate the shaft seal and the special tool with PAG oil or equivalent.
3. Position the shaft seal and the special tool over the A/C compressor shaft.
4. Using the special tool, push the shaft seal onto the A/C compressor shaft until seated.
