Mustang V8-4.6L SC VIN Y (2004)
Evaporator Case: Service and Repair
Removal and Installation
EVAPORATOR CORE HOUSING
REMOVAL
NOTE: The evaporator core is not separately serviceable, it is serviced only with the evaporator core housing assembly.
1. Disconnect the battery ground cable.
2. Recover the refrigerant. Refer to: Heating and Air Conditioning, Service and Repair, Refrigerant Discharging and Recovery Procedure,
See: Service and Repair/Refrigerant Discharging and Recovery procedure
3. Drain the cooling system.
4. Remove the instrument panel. For additional information, refer to: Dashboard/Instrument Panel. See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair
5. Disconnect the heater hose couplings from the heater core.
6. Disconnect the vacuum connector.
7. Remove the suction accumulator/drier.
8. Disconnect the A/C liquid line.
-
Discard the O-ring seals.