Mustang V8-4.6L SC VIN Y (2004)
Dome Lamp: Service and Repair
LAMP ASSEMBLY - MAP/DOME
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the lamp lens from the lamp assembly.
3. Remove the lamp assembly.
1
Remove the screws.
2
Remove the lamp assembly.
-
Disconnect the electrical connectors.
INSTALLATION
1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
To install, reverse the removal procedure.
