Mustang V8-4.6L SC VIN Y (2004)
2. Remove the right hand restraints control module (RCM) bracket retaining bolt.
1
Position the carpet back at the right hand side of the instrument panel (I/P) center support bracket.
2
Remove the RCM bracket retaining bolt.
3. Remove the RCM with bracket.
1
Position the carpet back at the left hand side of the I/P center support bracket.
2
Disengage the RCM electrical connector locking clip.
3
Disconnect the RCM electrical connector.
4
Remove the two retaining bolts.
5
Remove the RCM with bracket.
INSTALLATION
WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions and notes at the beginning of the removal
procedure.
1. WARNING: The tightening torque of the air bag restraints control module (RCM) retaining bolts is critical for correct system
operation.
Connect the RCM.
1
Position the RCM.
2
Install the bolts.
3
Connect the RCM electrical connector.
4
Slide and engage the RCM electrical connector locking clip.
5
Reposition the carpet.