Mustang V8-4.6L SC VIN Y (2004)
Brake Light Switch: Service and Repair
LAMP SWITCH - BRAKE PEDAL POSITION (BPP)
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the brake pedal position (BPP) switch.
1
Remove the clip.
2
Remove the retainer.
3
Disconnect the electrical connector
4
Remove the BPP switch.
INSTALLATION
1. NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
To install, reverse the removal procedure.
