Mustang V8-4.6L SC VIN Y (2004)
Disconnect the oil pressure sender unit electrical connector.
11. CAUTION: Failure to tighten the negative cable ground nut may cause ground circuit failure or arcing.
NOTE: 4.6L 2V shown; 3.8L and 4.6L 4V similar.
Remove the battery ground cable nut at the engine block.
12. Remove the nut and disconnect the generator electrical connections.
-
Position the cover aside.
13. NOTE: 4.6L 2V shown; 3.8L and 4.6L 4V similar.
Remove the front lower cable harness bracket nuts.
14. Pull the harness assembly downward until it clears the engine/radiator area.
