Mustang V8-4.6L SC VIN Y (2004)
4. Remove and discard the subframe front bolts.
5. Install new bolts and nuts. Tighten the bolts.
6. Remove the special tool 014-00765.
7. Support the lower suspension arm and bushings with jack stands.
8. CAUTION: Make sure the hardened washer is installed between the lower suspension arm and bushing and the shock absorber. Failure to do so
can result in damage and failure of the lower suspension arm and bushing.
Connect the shock absorbers to the lower suspension arm and bushing and install new bolts and nuts.
9. Clip the ABS sensor wires to the subframe.
