Mustang V8-4.6L SC VIN Y (2004)
Windshield: Vehicle Damage Warnings
CAUTION:
-
Cover the instrument panel to prevent possible damage.
-
Care must be taken to prevent scratching the pinch weld.
-
After installing the urethane installed windshield, the vehicle should not be driven until the urethane adhesive has cured. The curing time
at temperatures above 13°C (55°F) and relative humidity above 50% is 12-24 hours (Refer to ESSEX drive away chart for cure times as
temperatures and humidity vary). Inadequate curing of the urethane adhesive may adversely affect the strength of the urethane adhesive
bond.
-
Wipe off the urethane glass prep immediately after each application because it flash dries. Apply deliberate strokes, making sure not to
overlap the applied area.
-
Open a window to prevent the windshield glass from being pushed out by air pressure when a door is closed.
