Mustang V8-4.6L SC VIN Y (2004)
Wiper Motor: Service and Repair
MOTOR - WINDSHIELD WIPER
REMOVAL
CAUTION: The internal permanent magnets used in the windshield wiper motor are made of a glass-like material. To avoid damaging the
magnets, do not strike the motor with a hammer or any other object.
NOTE: The windshield wiper motor is not a repairable item. If worn or damaged, install a new wiper motor.
1. Park the windshield wipers in the full upright position. This will allow for easy access to the retaining clip on the wiper motor output shaft.
2. Remove the cowl top vent panels.
3. Disconnect the negative battery cable.
4. Disconnect the mounting arm and pivot shaft linkage from the wiper motor output shaft.
1
Remove the clip.
2
Disconnect the mounting arm and pivot shaft linkage.
5. Remove the wiper motor.
1
Disconnect the electrical connector.
2
Remove the bolts.
INSTALLATION