Mustang V8-4.6L SOHC VIN X (2003)
13. Remove the hydraulic lines from the cylinder.
NOTE: Prior to their removal, mark the upper and lower hydraulic lines to insure correct installation on the new cylinder.
Motor assembly
14. Remove the hydraulic lines from the motor assembly.
NOTE: Prior to removal, mark the hydraulic lines to insure correct installation of the motor assembly.
INSTALLATION
Lift cylinder
1. Install the hydraulic lines using a thread locker onto the lift cylinder.
NOTE:
^
Be sure that each fitting is installed in the correct position on the folding top hydraulic component.
^
Make sure that the tetra seal is installed in the bottom of each of the folding top hydraulic cylinder ports before attaching the upper and lower
hose fittings.
Motor assembly
