Mustang V8-4.6L SOHC VIN X (2003)
Special Tool, Position Cyl.1 At TDC.
7. Using the special tool, position the crankshaft so the number one cylinder is at TDC.
8. Remove the special tool.
9. Install the crankshaft sprocket, making sure the flange faces forward.
10. Install the timing chain guide.
1
Position the LH timing chain guide.
2
Install and tighten the LH bolts.
3
Position the RH timing chain guide.
4
Install and tighten the RH bolts.