Mustang V8-4.6L SOHC VIN X (2003)
1. Clean the A/C disc and field coil and pulley mounting surfaces.
2. Install the A/C clutch field coil.
1. Place the A/C clutch field coil on the A/C compressor with the A/C clutch field coil electrical connector correctly positioned.
2
Using the special tools, install the A/C field coil.
CAUTION: Do not use air tools. The A/C clutch field coil can be easily damaged.
3. Install the A/C clutch pulley.
NOTE: The A/C clutch pulley is a tight fit on the A/C compressor head. It must be correctly aligned during installation.
4. Install the pulley snap ring with the bevel side out.
5. Place one nominal thickness A/C clutch hub spacer inside the clutch hub spline opening.
