Mustang V8-4.6L SOHC VIN X (2003)
REMOVAL
1. Remove the A/C compressor.
2. Remove the bolt.
1
Hold the A/C disc and hub assembly with the special tool.
2
Remove the bolt.
3. Remove the A/C disc and hub assembly and spacer.
1
Thread an 8 x 1.25 mm (0.05 in) bolt into the A/C disc and hub assembly to force it from the compressor shaft.
2
Lift the A/C disc and hub assembly and spacer from the compressor shaft.
4. Using the special tool, remove the shaft seal felt from the nose of the A/C compressor.
5. Clean the compressor nose area.
6. Insert the tip of the special tool into one of the snap ring eyes.