Mustang V8-4.6L SOHC VIN X (2003)
6. Remove the bearing retainer.
7. Remove the bearing and gear.
^
Thoroughly clean all drill shavings from the steering column and inspect it for damage.
INSTALLATION
1. To install, reverse the removal procedure.
^
Install a new ignition switch lock cylinder.
^
Verify ignition switch lock cylinder operation.
2. Reactivate the supplemental restraint system (SRS).
WARNING: TO AVOID THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS,
NOTES AND INSTRUCTIONS IN THE REACTIVATION PROCEDURE.
