Mustang V8-4.6L SOHC VIN X (2003)
11. Remove the key-in-ignition warning indicator switch.
12. Remove the two clockspring electrical connectors from the bracket. Disconnect the remaining electrical connector.
13. Remove the wire harness from its holders.
14. Remove the clockspring.
1
Pry the clockspring retaining clips loose.
2
Remove the clockspring.
INSTALLATION
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS AND
NOTES AT THE BEGINNING OF THE REMOVAL PROCEDURE.
Vehicles receiving a new clockspring
1. Remove the key from the clockspring, holding the rotor in its centralized position.
