Mustang V8-4.6L SOHC VIN X (2003)
Seat Belt Buckle: Service and Repair
Rear Seat
REMOVAL
1. Remove the rear seat cushion.
2. Remove the bolt and the safety belt buckle.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
^
LH and RH rear seat safety belt buckles have different anchor plates. Make sure correct part is used when installing buckle and anchor plate in
the anchor locator feature.
^
LH rear seat safety belt buckle anchor plate shown.
2. Make sure the safety belt buckles are routed correctly and are placed through the seat cushion.
3. Check the restraint system for correct operation.
