Mustang V8-4.6L SOHC VIN X (2003)
16. Rotate the differential several times to verify that the differential bearings have seated correctly.
17. Using the special tools, recheck the backlash.
^
If backlash is within the specification, go to Backlash within specification in this procedure. If backlash is not within the specification, repeat
Backlash not within specification in this procedure.
^
The specification shown is the full allowable range.
Backlash within specification
18. Remove the bolts and bearing caps.
19. Set the differential bearing preload.
1
To establish differential bearing preload, increase both left and right differential bearing shim sizes by the specification shown.
2
Using the special tool, fully seat the differential bearing shims. Make sure the assembly rotates freely.
