Mustang V8-46L SOHC VIN X (2003) - Windshield Washer Reservoir | Service Precautions
Windshield Washer Reservoir: Service and Repair
REMOVAL
1. Remove the LF wheel and tire.
2. Position the front portion of the LF inner splash shield aside.
3. Position windshield washer reservoir aside.
1
Disconnect the electrical connector.
2
Remove the bolt.
3
Position windshield washer reservoir aside.
WARNING: WINDSHIELD WASHER SOLUTION CONTAINS METHANOL, WHICH IS POISONOUS. OBSERVE ALL
CAUTIONS AND WARNINGS INDICATED ON LABEL OF WASHER SOLUTION CONTAINER.
NOTE: To prevent spilling windshield washer fluid, drain the windshield washer reservoir before removal.
4. Remove the washer fluid reservoir.
^
Disconnect the windshield washer pump hose.
INSTALLATION
1. To install, reverse the removal procedure.
^
Fill the windshield washer reservoir.
WARNING: WINDSHIELD WASHER SOLUTION CONTAINS METHANOL, WHICH IS POISONOUS. OBSERVE ALL
CAUTIONS AND WARNINGS INDICATED ON LABEL OF WASHER SOLUTION CONTAINER.
CAUTION: Do not operate the windshield washer pump prior to filling the windshield reservoir.
