Mustang V8-4.6L VIN H (2005)
Part 2
Removal and Installation
1. Remove the speaker enclosure.
2. Disconnect the luggage compartment subwoofer amplifier jumper harness electrical connector.
3. Remove the 3 luggage compartment subwoofer amplifier rack bolts.
-
To install, tighten to 15 Nm (11 lb-ft).
4. Remove the nut and the luggage compartment subwoofer amplifier rack.
-
To install, tighten to 15 Nm (11 lb-ft).
5. Remove the 4 nuts and bolts and the pair of luggage compartment subwoofer amplifiers.
-
Disconnect the electrical connectors.
-
To install, tighten to 5 Nm (44 lb-in).
6. To install, reverse the removal procedure.