Mustang V8-4.6L VIN H (2005)
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the air cleaner outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
3. Remove the bolt and position aside the power steering reservoir.
^
To install, tighten to 8 Nm (71 inch lbs.).
4. Remove the 2 bolts and position aside the degas bottle.
^
To install, tighten to 8 Nm (71 inch lbs.).
5. Detach the lower degas bottle hose and position aside.
6. Disconnect the cooling fan motor and shroud electrical connector.
7. Remove the 2 bolts and the cooling fan motor and shroud.
^
To install, tighten to 9 Nm (80 inch lbs.).
8. To install, reverse the removal procedure.
