Mustang V8-4.6L VIN H (2005)
Transmission Position Switch/Sensor: Service and Repair
Digital Transmission Range (TR) Sensor
Digital Transmission Range (TR) Sensor
Special Tool(s)
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. WARNING: Secure the transmission to the transmission jack with a safety chain. Failure to follow these instructions may result in
personal injury.
Using a suitable transmission jack, support the transmission.
3. Remove the transmission mount crossmember and lower the transmission enough to gain access to the digital transmission range (TR) sensor.
-
To install, tighten to 55 Nm (41 lb-ft).
4. Disconnect the digital TR sensor connector.
