Mustang V8-4.6L VIN H (2005)
7. CAUTION: Do not damage the solenoid body connector pins.
Remove the solenoid body boles and remove the solenoid body by lifting on the body and pushing the connector from the other side of the case.
Installation
1. Install new 0-ring seals on the solenoid body connector. Lubricate the 0-ring seals with clean automatic transmission fluid.
2. CAUTION: Inspect the transmission case bore to make sure it is free of foreign material and not damaged. If it is damaged, transmission
leaks may occur.
Install the solenoid body. Tighten the screws in the sequence shown.
-
Tighten to 8 Nm (71 lb-in).
3. CAUTION: Lubricate the fluid filter seals with clean automatic transmission fluid or they may be damaged.
NOTE: Make sure the fluid filter seals are correctly seated on the filter.