Mustang V8-4.6L VIN H (2005)
Torque Converter Clutch Solenoid: Service and Repair
Solenoid Body Assembly
Material
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the heated oxygen sensor connectors from the front of the transmission pan rail and disconnect the wire retaining clip from the right side
of the transmission pan rail.
3. Remove the transmission fluid pan drain plug and drain the transmission.
4. Remove the transmission fluid pan screws, gasket and fluid pan.
5. NOTE: Clean the area around the solenoid body connector to prevent contamination. Disconnect the solenoid body harness electrical connector.
6. Remove the screws and the transmission fluid filter.
