Mustang V8-5.0L (2011)
Oil Change Reminder Lamp: Service and Repair
Oil Life
This displays the remaining oil life.
An oil change is required whenever indicated by the message center and according to the recommended maintenance schedule. USE ONLY
RECOMMENDED ENGINE OILS.
To reset the oil monitoring system to 100% after each oil change perform the following:
1. Press and release SETUP to display "OIL LIFE XXX% HOLD RESET=NEW".
2. Press and hold RESET for two seconds and release to reset the oil life to 100%.
NOTE: To change oil life 100% value to another value, proceed to Step 3.
3. Once "OIL LIFE SET TO XXX%" is displayed, release and press the RESET button to change the Oil Life Start Value. Each release and press will
reduce the value by 10%.
