Mustang V8-5.4L SC (2008)
Communications Control Module: Service and Repair
AUDIO CONTROL MODULE (ACM)
Removal and Installation
NOTE:
-
It is not necessary to remove the audio control module (ACM) to retrieve the part number.
-
If installing a new navigation ACM, remove the navigation DVD, if possible, before sending the ACM to an authorized audio system repair
facility.
1. NOTE: Module configuration is only required if a new ACM is being installed.
Upload the ACM configuration information to the scan tool.
2. Remove the instrument panel center finish panel.
3. Remove the 4 screws and the ACM.
-
Disconnect the electrical connectors and the antenna lead-in cable.
4. To install, reverse the removal procedure.
-
Download the configuration information to the ACM.
