ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Body - Exterior Door Handle Not Flush/Loose/Rattles|Page 6299 > < Cowl Moulding / Trim|Service and Repair
Page 1
background image

Front Door Exterior Handle: Customer Interest
Body - Exterior Door Handle Not Flush/Loose/Rattles

TSB 07-16-7

08/20/07

EXTERIOR DOOR HANDLE NOT FLUSH IN THE CLOSED POSITION

FORD:
2005-2008 Mustang

ISSUE
Some 2005-2008 Mustang vehicles may exhibit an exterior door handle not flush in the closed position. This may result in a loose handle, rattle noise,
hard to open, and/or door self locks when opening outside handle. (Figure 1)

ACTION

The concern is caused by pre-loading/biasing the exterior door handle actuating rod, the front door latch, or both. Follow the Service Procedure steps to
correct the condition.

SERVICE PROCEDURE

1.

Raise the door window glass to the full up position.

2.

Remove the door trim panel. Refer to Workshop Manual (WSM), Section 501-05.

3.

Position the watershield aside.

Body - Exterior Door Handle Not Flush/Loose/Rattles|Page 6299 > < Cowl Moulding / Trim|Service and Repair