Mustang V8-5.4L SC (2008)
1.
Verify that the plastic cowl panel grill is evenly seated against the windshield and not warped. If warped, replace with current service stock.
2.
Remove the cowl panel grill. Refer to Workshop Manual (WSM), Section 501-02, and inspect for proper cowl panel mount grommet installation
and pinch weld sealing. Water may enter the cowl channel, through the cowl panel grommets / seals or forward pinch weld, potentially causing a
sloshing sound and/or water leaking down the dash kick panel area. If there is standing water in the cowl channel, remove by siphoning through a
cowl panel mount grommet hole. (Figures 7-8 - end of article)
