Mustang V8-5.4L SC (2008)
13. NOTE: OEM OCS pressure sensor shown, OCS system service kit pressure sensor similar.
Bend to release the tab and remove the pressure sensor from the bracket.
14. NOTE: Note wire harness routing for installation.
Release any seat wire harness routing pin-type retainers from the cushion frame.
Passenger seat with OEM OCS
15. Remove the OCS bladder pin-type retainers.
Passenger seats with OEM OCS or OCS system service kit
16. NOTE: Note the cushion frame opening that the OCS components and seat wire harness are being routed through for installation.
Remove the OCSM and seat wire harness from the cushion frame.
-
Feed the hose, pressure sensor, wire harness, electrical connectors and OCSM through the opening in the cushion frame.
Driver seat
17. NOTE: Note wire harness routing for installation.
Release any pin-type retainer(s) and remove the seat wire harness from the cushion frame.
All seats
18. CAUTION: Use care when separating the seat cushion trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn
from the seat cushion foam.
