Mustang V8-5.4L SC (2008)
Disc Brake System - Exploded View (Part 2)
Removal
1. Remove the brake pads.
2. Remove the 2 brake caliper anchor plate bolts and the brake caliper.
^
Discard the bolts.
Installation
1. CAUTION: In order for the brake caliper anchor plate bolts to attain the proper clamp load when installed, the residual thread lock
compound must be cleaned out of the bolt threads of the anchor plate.
Clean any residual thread lock compound, and any other foreign material, from the threads of the brake caliper anchor plate.
2. Position the brake caliper anchor plate and install 2 new anchor plate bolts.
^
Tighten to 103 Nm (76 lb-ft).
3. Install the brake pads.
