Mustang V8-5.4L SC (2008)
Drive Belt Tensioner: Service and Repair
Supercharger Belt Tensioner
Supercharger Belt Tensioner
Supercharger Belt, Tensioner and Pulley - Exploded View
Removal and Installation
1. Using a suitable belt tensioner release tool, rotate the supercharger (SC) belt tensioner clockwise and remove the SC belt from the SC pulley.
2. NOTE: The SC belt is routed behind the SC belt tensioner.
Remove the SC belt tensioner bolt and tensioner.
^
To install, tighten to 48 Nm (35 lb-ft).
3. NOTE: Refer to the illustration for correct SC belt routing.
To install, reverse the removal procedure.
