Mustang V8-5.4L SC (2008)
7. Using a new gasket, install the oil pan, 14 bolts and 2 stud bolts.
^
Tighten in the sequence shown to 25 Nm (18 lb-ft).
8. Install the wire harness retainer bracket on the oil pan stud bolt and install the nut.
^
Tighten to 10 Nm (89 lb-in).
9. Attach the wiring harness retainer to the oil pan stud bolt.
10. Attach the 2 wiring harness retainers to the oil pan.
11. Using the special tools, lower the engine onto the engine support insulators.
