Mustang V8-5.4L SC (2008)
12. Install the LH and RH engine support insulator nuts.
^
Tighten to 63 Nm (46 lb-ft).
13. Install the engine-to-transmission spacer plate.
14. Install the flywheel.
15. Install the air cleaner outlet pipe.
16. Install the battery and tray. For additional information, refer to Battery.
17. Install the strut tower cross brace and the 4 nuts.
^
Tighten to 35 Nm (26 lb-ft).
18. Fill the engine with clean engine oil.
