Mustang V8-5.4L SC (2008)
8. Remove the 4 coolant pump pulley bolts and the coolant pump pulley.
^
To install, tighten to 25 Nm (18 lb-ft).
9. Disconnect the coolant pump-to-lower radiator hose assembly.
10. Remove the 4 bolts and the coolant pump.
^
Discard the coolant pump O-ring seal.
^
To install, tighten to 25 Nm (18 lb-ft).
11. To install, reverse the removal procedure.
^
Install a new coolant pump O-ring seal and lubricate with clean engine coolant.
12. Fill and bleed the cooling system.
13. Fill and bleed the SC cooling system.
