Mustang V8-5.4L SC (2008)
6. WARNING: Always deplete the backup power supply before repairing or installing any new front or side air bag supplemental restraint
system (SRS) component and before servicing, removing, installing, adjusting or striking components near the front or side impact
sensors or the restraints control module (RCM). Nearby components include doors, instrument panel, console, door latches, strikers, seats
and hood latches.
Refer to the Description and Operation portion of Air Bag Systems for location of the RCM and impact sensor(s).
To deplete the backup power supply energy, disconnect the battery ground cable and wait at least 1 minute. Be sure to disconnect
auxiliary batteries and power supplies (if equipped).
Failure to follow these instructions may result in serious personal injury or death in the event of an accidental deployment.
Disconnect the battery ground cable and wait at least one minute.
7. Remove the 2 driver air bag module bolt caps (1 shown) from the steering wheel.
8. Remove the 2 driver air bag module bolts (1 shown).
9. NOTE: Label the driver air bag module squib number on the driver air bag module electrical connectors before disconnecting.
Disconnect the 2 electrical connectors and remove the driver air bag module.
10. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
