ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Supplemental Restraint System (SRS) Depowering and Repowering|Page 1271 > < Supplemental Restraint System (SRS) Depowering and Repowering|Page 1269
Page 4
background image

16. Release the red locking tab and disconnect the driver side air bag module electrical connector.

17. Attach the restraint system diagnostic tool to the vehicle harness side of the driver side air bag module electrical connector.

18. Install RCM fuse 17 (10A) to the SJB.
19. Connect the battery ground cable.

Reactivation

1. Remove RCM fuse 17 (10A) from the SJB.
2. Disconnect the battery ground cable and wait at least one minute.
3. Remove the restraint system diagnostic tool from the vehicle harness side of the driver side air bag module electrical connector.

4. Connect the driver side air bag module electrical connector and reset the red locking tab.

Supplemental Restraint System (SRS) Depowering and Repowering|Page 1271 > < Supplemental Restraint System (SRS) Depowering and Repowering|Page 1269