Mustang V8-5.4L SC (2008)
All seats
2. WARNING:
-
Before installing the seat side air bag module/deployment chute assembly:
-
Inspect the side air bag module and mounting surfaces for any damage or foreign material.
-
Remove any foreign material from the mounting surfaces of the deployment chute, the seat backrest frame mounting bracket and
the air bag module cavity in the seat backrest foam pad.
-
Install new parts if damaged.
Failure to follow these instructions may result in the seat side air bag deploying incorrectly, which increases the risk of serious
personal injury or death in a crash.
-
If the seat side air bag cover has been damaged or separated from its mounting, or if the air bag material has been exposed, install a
new seat side air bag module. Never try to repair the seat side air bag module. Failure to follow these instructions may result in the
seat side air bag deploying incorrectly, which increases the risk of serious personal injury or death in a crash.
CAUTION: Make sure the side air bag module wiring harness is not pinched between the side air bag module and the mounting bracket.
Install the side air bag module and the bolts.
-
Tighten the bolts to 10 Nm (89 lb-in).
3. NOTE: Note wire routing from removal.
Attach the wiring pin-type retainers to the seat backrest frame.
4. Reposition the seat back foam pad to the seat backrest frame.
