Mustang V8-5.4L SC (2008)
2. Using the special tools, install the output flange.
3. Install a new nut.
^
Tighten to 130 Nm (96 lb-ft).
4. Install the 4 transmission crossmember-to-floor pan screws only.
^
Tighten to 63 Nm (46 lb-ft).
2. Using the special tools, install the output flange.
3. Install a new nut.
^
Tighten to 130 Nm (96 lb-ft).
4. Install the 4 transmission crossmember-to-floor pan screws only.
^
Tighten to 63 Nm (46 lb-ft).