Mustang V8-5.4L SC (2008)
Removal
1. Remove the parcel shelf.
2. Disconnect the 2 heated rear window electrical connectors.
3. Before cutting the urethane adhesive, remove dirt and other foreign material from the rear window glass pinch weld area.
-
Use a clean shop towel or oil-free compressed air.
4. NOTE: Refer to manufacturer's instructions before using the tool.
Lubricate the urethane adhesive with water to aid the Interior Auto Glass Cut-Out Knife Kit when cutting the urethane adhesive.
5. WARNING:
-
Always wear eye protection when servicing a vehicle. Failure to follow this instruction may result in serious personal injury.
-
Wear protective gloves when handling components or parts that have pointed or sharp edges. Failure to follow this instruction may
result in serious personal injury.
CAUTION: To avoid rust formation, use extreme care not to scratch the paint or primer, or otherwise damage the pinch weld during
