ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Deactivation Indicator|Service and Repair|Page 8715 > < Speed Control On/Off Switch|Page 8710
Page 1
background image

Air Bag Deactivation Indicator: Service and Repair

PASSENGER AIR BAG DEACTIVATION (PAD) INDICATOR

Removal and Installation

WARNING:

-

Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module.
This will reduce the risk of injury in the event of an accidental deployment.

-

To reduce the risk of personal injury, do not use any memory saver devices.

NOTE:

-

The air bag warning lamp illuminates when the RCM fuse is removed and the ignition switch is ON. This is normal operation and does not indicate
a supplemental restraint system (SRS) fault.

-

Repair is made by installing a new part only. If the new part does not correct the condition, install the original part and carry out the diagnostic
procedure again.

-

The SRS must be fully operational and free of faults before releasing the vehicle to the customer.

-

he passenger air bag deactivation indicator is part of the hazard switch/traction control switch assembly.

1. Depower the system.

Air Bag Deactivation Indicator|Service and Repair|Page 8715 > < Speed Control On/Off Switch|Page 8710