Mustang V8-5.4L SC VIN S (2007)
6. Remove the lower steering column shroud 2 screws.
7. Remove the upper steering column shroud.
8. NOTE: If the clockspring is to be reinstalled, do not allow the clockspring to turn from its removal position.
If reusing the clockspring, tape the clockspring center rotor to the outer housing to keep it from rotating.
9. NOTE: The tilt steering column mechanism is spring loaded,
carefully release the tilt handle while repositioning. Carefully position the steering column up and leave the tilt handle in the unlocked position.
10. Position the lower steering column shroud downward.
11. Disconnect the clockspring electrical connector.
